Lead2pass 2017 August New Cisco 200-150 Exam Dumps!
100% Free Download! 100% Pass Guaranteed!
Test your preparation for Cisco 200-150 with these actual 200-150 new questions below. Exam questions are a sure method to validate one’s preparation for actual certification exam.
Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/200-150.html
QUESTION 11
Which option describes what a switch does after it items that a host has connected to a switch port?
A. Flood the frame only on all of its trunk ports.
B. Create a MAC to port mapping entry in MAC table.
C. Flood the frame only on all of its access ports.
D. Discard the frame.
Answer: B
QUESTION 12
A network design team has decided to use a standard protocol to consolidate the Ethernet and San data using the existing Nexus switches.
Which I/O technology can satisfy this need?
A. FCoE
B. IEEE 802. 1AB
C. SCS
D. AToM
Answer: A
QUESTION 13
What are two physical components of the Cisco UCS B-Series server? (Choose two.)
A. mezzanine slots
B. power supplies (maximum of two)
C. lockable front door
D. redundant hot swappable fans
E. CPU sockets
Answer: AE
QUESTION 14
A network engineer wants to apply for new license key file.
Which command should be used to obtain the switch serial number?
A. MDS-A# show license serial-number
B. MDS- A# show running-config | include serial-number
C. MDS- A# show host-id
D. MDS- A# show license host-id
Answer: D
QUESTION 15
Which two features must be licensed on a Cisco Nexus 7000 Switch? (Choose two)
A. Virtual Port Channel
B. Layer 3
C. Virtual Device Contexts
D. iSCSI
E. Fibre Channel
Answer: BC
QUESTION 16
What native Fibre Channel technology facilitates connecting multiple Fibre devices behind a single FC address?
A. Fiber Channel over Ethernet
B. N-Port Virtualization
C. Fibre Channel Arbitrated Loop
D. N-Port Identification Virtualization
Answer: D
QUESTION 17
An engineer implemented a new VSAN and examined the F-mode trunks connecting an upstream switch.
The engineer noticed that the new VSAN is stuck in initializing.
Which two options explain why this is happening? (Choose two.)
A. A device has not attempted to log in the ne VSAN across the trunk.
B. Only the primary VSAN lists as active while subordinate VSANs stay initializing.
C. The trunk must be disabled an re-enabled to join the new VSAN.
D. Only the secondary VSAN lists as active while primary VSANs stay initializing.
E. The new VSAN has not been configured in the upstream switch.
Answer: AE
QUESTION 18
Which two options are multicast addresses? (Choose two.)
A. FD00::2
B. 192.168.2.2
C. FF05::2
D. 226.10.10.10
E. 240.1.0.1
Answer: CD
QUESTION 19
Which two options are file-based storage protocols? (Choose two.)
A. Telnet
B. CIFS
C. Fibre Channel
D. NFS
E. iSCSI
Answer: BD
QUESTION 20
A SAN administrator recently added a new zone to the VSAN 2 zone set named zone set2, but the server is still unable to access the shared storage.
Which command will resolve this issue?
A. zoneset activate zoneset2
B. copy running-config startup-config
C. zone default-zone permit vsan 2
D. zone copy active-zoneset full-zoneset
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/zone.html?dtid=osscdc000283
“If zoning is not activated, all devices are members of the default zone.”
“Changes to a zone set do not take effect in a full zone set until you activate it.”
These Cisco 200-150 exam questions are all a small selection of questions. If you want to practice more questions for actual 200-150 exam, use the links at the end of this document. Also you can find links for 200-150 VCE software that is great for preparation and self-assessment for Cisco 200-150 exam.
200-150 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDbUFVZERzemRpeEU
2017 Cisco 200-150 exam dumps (All 106 Q&As) from Lead2pass:
https://www.lead2pass.com/200-150.html [100% Exam Pass Guaranteed]