2016 July Cisco Official New Released 642-999 Q&As in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
After purchasing the dumps for the 642-999 Exam from Lead2pass, I had no doubt that I’d easily pass the exam. Bundle of thanks to Lead2pass for helping me pass the exam without any troubles.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/642-999.html
QUESTION 144
Which three parameters can be configured for a vHBA? (Choose three.)
A. Enable persistent binding.
B. Enable a hardware-based failover.
C. Define a SAN pin group
D. Assign a QoS policy.
E. Define an MTU.
F. Assign a MAC address.
Answer: ACD
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html
QUESTION 145
With Cisco UCS Manager, in which location do you monitor the chassis discovery process?
A. CMC
B. FSM
C. CDP
D. DME
Answer: B
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0100011.html
QUESTION 146
Which two protocols does the Cisco Integrated Management Controller support for managing standalone Cisco UCS -Series servers? (Choose two.)
A. SoL
B. IPMI
C. IPMIv2
D. SMASH CLP
E. SNMPv3
Answer: CE
Explanation:
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/at-a-glance-c45-737177.pdf
QUESTION 147
Which three statements about what occurs when a Cisco UCS -Series Blade Server connects to the SAN across a fabric interconnect that is enabled in Fibre Channel NPV mode are true? (Choose three.)
A. The server ports in F Port mode are pinned to the NP Ports.
B. The E Ports are pinned to the E Ports on the fabric interconnect.
C. Zoning is deployed on the fabric interconnect.
D. The fabric interconnect is not assigned a Fibre Channel domain ID.
E. Traffic that is received on the server ports in F Port mode from the server side is pinned to the NPIV-enabled uplink ports on the fabric interconnect.
F. The fabric interconnect must have the Fibre Channel uplink port connected to the upstream switch F Port in NPIV mode that performs the Fibre Channel forwarder function.
Answer: ADE
QUESTION 148
You plan to implement FCoE on a Cisco UCS -Series server.
Which option must you configure from the Cisco Integrated Management Controller GUI?
A. a vNIC failover
B. a boot table entry
C. NIV
D. FIP mode
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-2-1/b_Cisco_UCS_CSeries_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_1/Cisco_UCS_CSeries_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_ 1_chapter9.html
QUESTION 149
Refer to the exhibit. Which tables correctly map the HIF ports to active FEX NIF ports on a Cisco UCS 2208X IOM in discrete pinning mode?
A. Table 2 and Table 4
B. Table 1 and T able 4
C. Table 2 and Table 3
D. Table 1 and Table 2
E. Table 3 and Table 4
Answer: B
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_01001.html
QUESTION 150
You have a Cisco UCS C-Series Server. What can you use to log the blade server statistics?
A. the Cisco Integrated Management Controller log
B. RADIUS
C. LDAP
D. the XML API
Answer: A
Explanation:
http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/datasheet-c78-733571.html
QUESTION 151
You manage Cisco UCS -Series Rack-Mount Servers. Which three components can you upgrade by using the Cisco Host Upgrade Utility? (Choose three.)
A. the LAN on motherboard
B. the Cisco Integrated Management Controller
C. the operating system images
D. the system BIOS
E. the fabric interconnects
F. the FEX modules
Answer: ABD
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/lomug/2-0-x/b_huu_2_0_3/b_huu_2_0_3_chapter_01.html
QUESTION 152
Which three components are parts of the Cisco UCS -Series Blade Server software bundle? (Choose three.)
A. the adapter firmware
B. the Kernel and system firmware for fabric interconnects
C. the BIOS firmware
D. the IOM firmware
E. the Cisco UCS Manager software
F. the board controller firmware
Answer: ACF
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_0100.html
QUESTION 153
Which slot(s) contain DIMMs in a 1DPC configuration on Cisco UCS blade server?
A. 0
B. 1 and 2 only.
C. 1
D. 2
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/blade-servers/install/B200.html
QUESTION 154
Which destination(s) are valid for syslog messages for a Cisco UCS Fabric Interconnect?
A. a file and monitor only
B. the log, the monitor and syslog queue
C. the console
D. the console and log only
E. a file
F. the console, the monitor, and a file
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/ucsm_syslog/b_Monitoring_Cisco_UCSM_Using_Syslog/b_Monitoring_Cisco_UCSM_Using_Syslog_chapter_010.html
I understood all of the questions very easily. I scored 96% on my first try. I am definitely going to spread the word amongst friends and colleagues. Keep up the great work.
2016 Cisco 642-999 exam dumps (All 175 Q&As) from Lead2pass:
http://www.lead2pass.com/642-999.html [100% Exam Pass Guaranteed!!!]